Easy To Use PS100 N1201SA UV RF Vector Impedance Antenna Analyzer Tester

Description

Easy To Use PS100 N1201SA UV RF Vector Impedance Antenna Analyzer Tester
DESCRIPTION
Features:
* Brand new and high quality
* Made of high quality materials,
* This instrument has four interfaces: single point measurement, scanning, information, correction and calibration
* By default, the enters the single-point measurement interface upon startup.
* Aluminum alloy shell to extend service life.
* Note: For user convenience, each calibration correction option will automatically change to user calibration. At the same time, in order to ensure the integrity of the calibration, during the calibration process, there is an automatic shutdown function when a fault occurs, and the power is always turned on.
Startup and shutdown:
* Hold down the CTRL key without pressing the power switch button.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
* When the power is on, press and hold (more than 2S) the switch button. After releasing it, the instrument will shut down.
Recommendations for use:
* In order to ensure the accuracy of measurement and calibration, the instrument must be warmed up for at least 15 minutes.
* Try to use high-quality RF cables and connectors.
* Those marked with calibration cables can be used directly without calibration.
* The test cable process affects the measurement accuracy. It is recommended not to choose a test cable that is too long when possible.
* Before measuring and calibrating, please make sure you are not in a strong wireless signal to avoid interference and inaccurate measurements.
* If you don’t understand the impedance measurement itself, you can refer to the instructions and tutorials of the vector network analyzer. This instrument is equivalent to a single-port vector network analyzer.
Specification:
Model: PS100
Working frequency: 137.5MHz~2700MHz
Step frequency: 1kHz
Display: 2.4-inch TFT, resolution 320*240 (QVGA)
Power consumption<1.5W
Charging current: 400mA
Charging port: USB
Automatic shutdown: can be set for 5-60 minutes
Measured parameters: impedance, reactance, SWR and S11
Resolution: 4 digit reading
Frequency accuracy: <±10ppm
Connector: SMA-K
Impedance measurement range:
1Ω~1000Ω@frequency<1300MHz;
1Ω~300Ω @frequency>1300MHz (absolute value of impedance)
Standing wave measurement range:
1~65@frequency<1300MHz;
1~10@frequency>1300MHz
S11(dB) measurement range: 0dB to -50dB
Error (single point measurement):
For impedance: For standing waves: < effective reading x 10%±0.1
For S11: 0.1dB/5° (0dB to -10dB)
For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
Directivity: < 35dB (140MHz to 2GHz after calibration); < 30dB (2GHz to 2.7GHz)
Scan points: 280
Output level: -18dBm
Working temperature: 0℃ to 40℃
Atmospheric pressure: 860hPa~1060hPa
Package Included:
1 x PS100 Antenna Analyzer SWR Meter
1 x data cable
1 x English user manual
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
POLICES
Shipping
Payment
WARRANTY
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.