New in Box Vertiv Avocent ACS800 4 Port Serial Console ACS804 ACS804EAC-001

Description

Vertiv Avocent ACS800 4 Port Serial Console ACS804 ACS804EAC-001
Brand n
ew in Box.
The Vertiv™ Avocent® ACS 800 Serial Console system delivers secure in-band and out-of-band visibility and control for IT equipment even in the event of a network outage. The system acts as a secure gateway and single point of entry with monitoring and management capabilities for connected devices. Zero-touch provisioning makes the Vertiv Avocent ACS 800 easy to install and configure, even with most third-party equipment.
The console has four USB ports to support external devices and an environmental sensor port for temperature, humidity, differential pressure and leak sensors. The Vertiv Avocent ACS 800 provides secure equipment access and control for banks, retail locations, manufacturing facilities, educational institutions, and other traditional and non-traditional edge locations.
Benefits:
-
Secure in-band and out-of-band network remote management
-
Fast, automated configuration with Zero Touch Provisioning
-
Access and troubleshoot remote locations using automatic network failover to cellular (and failback)
-
Automatic pin-out detection for both Cyclades and Cisco pinouts using straight through cables
-
Compliance with data center access and security policies – customizable, multiple access levels
-
Uses an embedded cryptographic module that is based on a FIPS 140-2 validated cryptographic module
Features:
-
Support for Liebert GXT4 UPS systems and Rack PDUs from Vertiv, ServerTech, APC, Raritan and Eaton
-
4 USB ports to support new IT equipment and external devices
-
Console event logging and notification, including “last gasp” capture
-
Regulatory compliance and easy troubleshooting – online and off-line data logging with time stamps
-
Strong dial-up and secure dial-back using optional built-in modem
-
Environmental sensor port to connect temperature, humidity, differential pressure, leak, door pin sensors (up to 8 can be daisy chained)
Operating System
Yochto project based Linux
Applications
Zero Touch Provisioning (ZTP)
In-band (Ethernet) and out-of-band (dial-up/cellullar modem) support
Optional external 4G/LTE celluar router
Availability
Automatic Ethernet or Cellular failover using second GbE port for failover
Support for multiple-routing tables
External AC/DC power supply design
Dual GbE Ethernet support
4x USB port support
System Management
Configuration wizard in Web for first-time users
Auto-discovery for automatic deployment
Command line interface (CLI)
Web Management Interface (HTTP/HTTPS)
SNMP
Internal temperature sensor
Security
Preset security profiles - secure, moderate and open
Custom security profiles
IPSec support with Third-Party certificates
X.509 SSH certificate support
SSHv1 and SSHv2
Local, RADIUS, TACACS+, LDAP/AD, NIS and Kerberos authentication
Two-factor authentication (RSA SecurID)
One-Time Password (OTP) authentication
Local, backup-user authentication support
PAP/CHAP and Extensible Auhtentication Protocol (EAP) authentication (for dial-up lines)
Group authorization:
TACACS+, RADIUS and LDAP
Port access
Power access
Appliance privilege
IP packet and security filtering
User-access lists per port
System event syslog
IPSec with NAT traversal support
IP forwarding support
Secure factory defaults
Strong password enforcement
Cabling
CAT-5 compatible adapters for simpler cabling
Autosensing for Cyclades and Cisco pin-outs for serial ports
Console Management
Sun break-safe (Solaris Ready Certified)
Break-over SSH support
Off-line data buffering - local and remote (NFS/Syslog/DSView software)
Level-based syslog filters
Time stamp and rotations for data buffering
Unlimited number of simultaneous sessions
Simultaneous access on the same port (port sniffing) with ability to toggle
Configurable event notification (e-mail, pager, SNMP trap)
Customizable, global time zone support
Multiple and customizable user levels of access
Port Access
Directly by server name or device name
CLI Command
Simultaneous Telnet and SSH access
HTTP/HTTPS
ACS804EAC-001 Technical Specifications
Mechanical
Height
1.3 in. (3.302 cm)
Width
8.38 in. (21.2852 cm)
Depth
7.16 in. (18.1864 cm)
Weight
3.8 lb. (1.72365 kg)
Environmental
Operating Temperature
-4° to 158°F (-20° to 70°C)
Storage Temperature
-4° to 158°F (-20° to 70°C)
Humidity
20% to 80% relative humidity (non-condensing) across the operating temperature range
Power
External AC/DC Power Adapter (power brick) 100-240 VAC, 50/60 Hz Input, 12 VDC Output
Operating Voltage
100-240 VAC, 50/60 Hz
Power Usage
Nominal voltage 120VAC:
Typical 80.5mA, 3.5W
Maximum 306mA, 17W
Nominal voltage 240VAC:
Typical 60mA, 3.75W
Maximum 191mA, 17W
Hardware Specifications
CPU
Dual Core ARM Cortex-A9 @ 766MHz
Memory
1GB DDR3L RAM
16GB eMMC Flash
Interfaces
2 dual media 1000Base-TX Copper ports
1 serial port with autosensing and switching support of Avocent andCisco pinouts
All serial source ports support RS232/422/485 multi-protocol with autosensing and switching support of Avocent and Cisco pinouts in RS232 mode
1 serial console port
4 USB 2.0 host ports
1 V.92/56K analog MODEM port
1-Wire interface for external sensors
Single RJ45 connector with four digital-in or digital-out ports for external contact closure sensors
Standards
Approved Agency
Emissions and Immunity:
- FCC Class A
- CE Class A (EU)
- ICES-003 (Canada)
- VCCI (Japan)
- RCM (Australia)
- Customs Union (CU)
- KCC (Korea)
Safety:
- UL (USA)
- cUL (Canada)
- EN-60950 (EU)
- CB
- Customs Union (CU)